Symbol Spectrum24 AP-3020 Reference Manual page 125

Itf ID
WLAP Itf MAC Addr
Itf State
Path Cost
Designated Root ID
Designated Cost
Designated WLAP ID a WLAP ID assigned by the Root AP
Designated Itf ID
Spectrum24 Access Point AP-3020 Product Reference Guide
– To update the values manually at the status display select
– To have the AP automatically update the display every two seconds
select .
Timed
– To return to the previous menu press ESC or
identifies the wireless interface the AP uses to
communicate with another device
states the MAC address of the associated WLAP
identifies the state of the interface from:
• DIS - the interface is disabled
• LIS - the AP listens for information
• LRN - the AP learns the information
• FWD - the AP forwards data
• BLK - the AP blocks transmission.
An abstract unit added to the Root Path Cost field in
the Config BPDU received on this interface. The unit
represents a hop on the path to the Root AP .
An ID designated by the Root AP . APs in WLAP mode
negotiate the position of Root AP at power up. The AP
with the lowest Root ID, path and WLAP ID becomes
the Root AP . The Root ID and the WLAP ID are 16-digit
numbers. The first 4 digits represent the Priority value
and the remaining 12 digits represent the MAC
address of the AP .
a path cost designated by the Root AP
an Itf ID assigned by the Root AP
Monitoring Statistics
Refresh
.
Previous-[F4]
.
117