Wireless Operation Parameters - Symbol Spectrum24 AP-3020 Reference Manual

2.5.1

Wireless Operation Parameters

The AP supports up to four WLAP interfaces.
102 for indication of AP status.
for repeater or bridge configuration, Symbol recommends the WLAPs with
the lowest WLAP IDs be placed on the wired network.
If an AP is bridging between wired LANs, Symbol recommends one LAN
contain the lower WLAP IDs. Symbol does not recommend low WLAP IDs
between wired networks, this can cause root association confusion between
the APs.
To configure the AP for wireless operation:
1. Select Set RF Configuration from the Main Menu.
2. Configure the settings as required:
Spectrum24 Access Point AP-3020 Product Reference Guide
See 4.8 LED Indicators on page
If there are more than two WLAPs connected
Configuring the AP
63