COPY ADJUSTMENTS: PRINTING/SCANNING
3.13.2 SCANNING
NOTE: 1) Before doing the following scanner adjustments, check and adjust the
printing leading-edge and side-to-side registrations and the printing
blank margins (as described above).
2) Use an S5S test chart to perform the following adjustments.
Registration: Platen Mode
1. Place the test chart on the exposure glass and make a copy from one of the
feed stations.
2. Check the leading edge and side-to-side registration, and adjust as necessary
using the following SP modes.
Leading edge
Side-to-side
B039/B040/B043
SP mode
Specification
2 ± 1.5 mm
SP4-010
2 ± 1.5 mm
SP4-011
A: Leading edge registration
B: Side-to-side registration
3-52
A
B
A250R515.WMF
SM