Two-Tray Paper Tray Unit Installation - Ricoh B039 Service Manual

1.6 TWO-TRAY PAPER TRAY UNIT INSTALLATION

1.6.1 ACCESSORY CHECK
Check the quantity and condition of the accessories against the following list.
No.
1 Screw – M4x10
2 Unit Holder
3 Adjuster
4 Unit Holder
1
1.6.2 INSTALLATION PROCEDURE
B384I158.WMF
1. Remove the strips of tape.
NOTE: After removing the tape that secures the peripheral components and
cardboard to the paper tray, make sure that there is no tape and/or
tape residue remaining on the tray.
2. Attach the adjuster [A] to the base plate, as shown.
NOTE: If a table is installed, this step is unnecessary.
SM
TWO-TRAY PAPER TRAY UNIT INSTALLATION
Description
2 3
1-13
Q'ty
10
4
1
2
4
B384I500.WMF
[A]
B039/B040/B043
B384I001.WMF