Main Scan Magnification; Scanning - Ricoh Bc-C1 Field Service Manual

Tray
Duplex: Plain
Duplex: Mid Thick
Duplex: Thick
2. Check the side-to-side registration [B] for each paper feed station, and adjust them using
SP1-002.
Tray
By-pass
Tray Main1
Tray Bank1
Tray Bank2
Duplex

Main Scan Magnification

• Use an S5S test chart to perform the following adjustments.
1. Check the magnification, and adjust the magnification using SP2-102-001 (Magnification
Adjustment Main Scan) if necessary. The specification is ± 0.5%.

Scanning

• Before doing the following scanner adjustments, perform or check the printing registration /side-to-
side adjustment and the blank margin adjustment.
• Use an S5S test chart to perform the following adjustments.
SP No.
SP1-001-013
SP1-001-014
SP1-001-015
SP No.
SP1-002-001
SP1-002-002
SP1-002-004
SP1-002-005
SP1-002-006
Adjustment after Replacement
Threshold
4.2 ± 1.5 mm
Threshold
2 ±1.5 mm
141