Ricoh B039 Service Manual page 163

USING SERVICE PROGRAM MODES
5
Mode Number/Name
930 Fax Forwarding Mode
940* Image Rotation
941* Duplex Blank Page
944* APS Mode Setting
950* By-pass LG Size Detection
951* Interleave Count Setting
952* By-pass Paper Type Reset
B039/B040/B043
Function/[Setting]
Selects whether the machine will accept changeover to
fax mode following occurrence of an SC error.
[0 = No / 1 = Yes]
When an SC occurs while there are received fax
messages in the SAF memory, change the value to "1".
Then access facsimile mode. Then forward the incoming
data to another fax machine using the fax mode bit
switches.
Enables/disables image rotation.
[0 = Enabled / 1 = Disabled]
This function is used for both rotate sort and rotate copy.
Selects whether the blank page is made on the front side
or back side when using duplex copy mode.
[0 = Back Side / 1 = Front Side]
Enables/disables APS mode as the power-up default.
[0: Disabled / 1 = Enabled]
Selects whether the machine can detect LG paper in the
by-pass tray.
[0 = No / 1 = Yes]
If "No" is selected, the machine detects LT instead of LG.
Selects the interleave count used when interleave mode
has been selected from User Tools [2. System Settings]
[11. Print Priority].
[1 ~ 20 / 5 / 1 page/step]
This determines what happens if there are jobs of different
types waiting. If the setting is 5 (for example), interleave
mode will print 5 pages of one job, then 5 pages of the
next job, and so on.
Selects the operational default paper type for the by-pass
tray. The machine returns to the value set here at power
up and whenever ! is pressed.
[0 = Thick / 1 = Plain / 2 = Selected]
If the setting is "2", the paper type selected in the User
Tools will be used.
5-22
→
SM