Ricoh B039 Service Manual page 436

System Switch 13 - Not used (do not change the settings)
System Switch 14 - Not used (do not change the settings)
System Switch 15
No FUNCTION
0 Not used
1 Going into the Sleep mode
automatically
0: Enabled
1: Disabled
2 Protocol dump data backup
0: Disabled
1: Enabled
3-7 Not used
System Switch 16 - Not used (do not change the settings)
System Switch 17
No FUNCTION
1-5 Not used
6 Memory Lock function
0: Disabled
1: Enabled
7 Not used
System Switch 18 - Not used (do not change the settings)
System Switch 19
No FUNCTION
0-6 Not used
7 Special Original mode
0: Disabled
1: Enabled
SM
COMMENTS
Do not change the settings.
1: The machine will restart from the Energy Saver
mode quickly, because the +5V power supply is
active even in the Energy Saver mode.
1: The machine backs up the protocol dump data for
approximately one hour when the main switch is
turned off, in the same way as image data.
Do not change the settings.
COMMENTS
Do not change the settings.
Change this bit to "1" when the customer requests.
Do not change the setting.
COMMENTS
Do not change the setting.
1: If the customer frequently wishes to transmit a form
or letterhead which has a colored or printed
background, change this bit to "1". "Special Original"
can be selected in addition to the "Text" and "Photo"
modes.
When this mode is selected, the "Text" and "Photo"
LEDs are both lit.
Cross reference
! Type of special original mode – Scanner switch 00
bit 0.
5-19
BIT SWITCHES
B404