Ricoh B039 Service Manual page 170

7
Mode Number/Name
825 Reset – Total Counter
901* Display – SC History
902 Clear – SC History
903* Display – Paper Jam History
904 Clear - Copy Jam History
905* Display - Original Jam History
906 Clear - Original Jam History
907 Reset - Timer Counter
SM
USING SERVICE PROGRAM MODES
Function/[Setting]
Resets the electrical total counter.
[0 = No / 1 = Yes]
• Usually, this is performed at installation. This SP mode
is effective only once, while the counter still has a
negative value. This SP mode cannot be used once the
counter takes a positive value.
• After selecting "1", press the Original Type key and the
OK key (or ' key) at the same time to execute the
reset. If the reset Is successful, the display shows
"Action completed." If the reset fails, the display shows
"Error!!!".
Displays the last twenty SC codes that have occurred.
[0 = No / 1 = Yes]
Clears the SC history.
[0 = No / 1 = Yes]
After selecting "1", press the Original Type key and the
OK key (or ' key) at the same time to execute the reset.
If the reset is successful, the display shows "Action
completed." If the reset fails, the display shows "Error!!!".
Displays the paper jam history.
[0 = No / 1 = Yes]
Clears the copy jam history.
[0 = No / 1 = Yes]
After selecting "1", press the Original Type key and the
OK key (or ' key) at the same time to execute the reset.
If the reset is successful, the display shows "Action
completed." If the reset fails, the display shows "Error!!!".
Displays the original jam history.
[0 = No / 1 = Yes]
Clears the original jam history.
[0 = No / 1 = Yes]
After selecting "1", press the Original Type key and the
OK key (or ' key) at the same time to execute the reset.
If the reset is successful, the display shows "Action
completed." If the reset fails, the display shows "Error!!!".
Resets the timer counter (SP7-991).
[0 = No / 1 = Yes]
After selecting "1", press the Original Type key and the
OK key (or ' key) at the same time to execute the reset.
If the reset is successful, the display shows "Action
completed." If the reset fails, the display shows "Error!!!".
5-29 B039/B040/B043