Usb Initialization; Factory Default; Reset System Events; Copy Setup To Usb - Digimerge DH100 Series Instruction Manual

USB Initialization

To format a USB drive:
WARNING: Formatting the USB drive
permanently erases all data.
1. Insert a USB drive to the front or rear
panel.
2. Click USB Initialization.
3. Click Yes on the warning to format the USB
drive.
4. Wait for a success message, and then
remove the USB drive. Right-click to exit.

Factory Default

To restore factory default settings:
1. Click Factory Default.
2. Click Yes on the warning to restore system
defaults.

Reset System Events

To reset System Events:
1. Click Reset System Events button.
2. Click Yes on the warning to system events.

Copy Setup to USB

Use the Copy Setup to USB function to copy
your system settings to a USB drive. You can
copy the settings back onto the DVR for later
use.
To copy the system setup settings to the USB:
1. Insert a blank USB key into the front or
rear panel of the system.
2. Click Copy Setup To USB.
3. Click Yes on the warning to copy the
settings to your USB key.

Download Setup from USB

After you have copied the system settings to a
USB key, you can download the settings to the
DVR.
To download system settings to your DVR:
1. Insert the USB key that contains the
system backup settings.
2. Click Download Setup from USB
3. Click Yes to begin copying the settings to
your system.
Upgrading the System
Firmware
To upgrade the system firmware:
1. Download the firmware from
www.digimerge.com
product page.
2. Copy the firmware to a USB key.
Ensure only the firmware is in the
NOTE:
USB key. A firmware file name looks like
this: sdvr11z.fw
3. Insert the USB key to the front or rear
panel of the system.
4. Click the UPGRADE button.
5. Select the firmware from the list.
6. Click Yes to begin the firmware upgrade.
Using the Main Menu
from the DH100's
41