Rear Panel - Digimerge DH100 Series Instruction Manual

Rear Panel

REAR PANEL
1
Rear panel (8-channel model shown)
1. ALARM IN: Alarm block to connect external alarm or motion devices (not included).
• RS485: Connection block for an RS485 PTZ camera (not included).
2. DC 12V: Port for 12V DC 3A power supply (included).
3. VIDEO OUT: Video output (BNC) to connect the system to a secondary monitor or DVR.
• SPOT OUT (16-channel only): Video output (BNC) to connect the system to a spot out monitor.
4. CAMERA IN: Camera input ports for BNC cameras (4/8-channel); port for Octopus cable
(16-channel).
5. AUDIO IN (Top port): One RCA port (mono) for recording audio from an audio capable camera
(not included).
• AUDIO OUT (Bottom port): One RCA port (mono) for audio output.
6. VGA: VGA port to connect the system to a VGA monitor.
7. USB port: Connect a USB mouse, connect a USB flash drive (not included) for data backup or
firmware upgrades, or connect a USB cable (not included) for a touch screen monitor (not
included).
8. LAN: Connect an Ethernet cable (not included) to connect the system to a router or switch
(not included).
4
3
2
3
Spot OUT port
(16-channel only)
4
4
Camera IN Octopus cable port
(16-channel only)
5 6 7 8