Usb - Updating The Dvr Firmware; Compatible Usb Devices - Digimerge D300 SERIES Installation Manual

SECTION 4

USB - Updating the DVR Firmware

Occasionally, updates to the DVR firmware become available on our website. These updates
can be installed on your DVR unit using the USB Memory Stick.
1. Download the most current program from the
to a Memory Stick. Compatibility has been successfully tested with the Lexar Jumpdrive 128/
256 MB, Sandisk Mini Cruzer 128 MB and Cruzer Micro 256MB.
2. Connect the Memory Stick to the USB 2.0 Port on the front panel of the DVR.
3. Enter the Menu by pressing the MENU button on the front panel of the DVR.
• Select the System Set Option, and choose Program Update
• NEW PROGRAM FOUND: If the new application is recognized, the DVR unit will display a
processing percentage. Reboot the DVR once complete.
• NEW PROGRAM NOT FOUND: If the application is not recognized, processing will not
continue.

Compatible USB Devices

The following USB devices have been tested successfully with the D300 Series DVR:
• Lexar Jumpdrive 128/256 MB
• SanDisk Mini Cruzer 128 MB
• SanDisk Cruzer Micro 256 MB
Revision 1.0
USB - Updating the DVR
http://www.digimerge.com website, and copy it
45