Starting And Stopping Continuous Recording - Digimerge DH100 Series Instruction Manual

Using the System

Starting and Stopping Continuous Recording

By default, the system immediately begins recording in continuous mode from any connected
cameras. The system records with the default recording settings (FRAME resolution, HIGH
quality, at 15 FPS). You can start and stop the system from Continuous Recording once you are
logged into the system as the administrator. Note that the system will continue motion and alarm
recording even if you stop Continuous Recording.
To start/stop Continuous Recording:
1. In the main viewing mode, right-click to open the quick menu. Click Record On/Off (
• If the Record icon (
not displayed in the channel, Continuous Recording is disabled. Always double-check to see
that the Record icon is present to ensure the system is in Continuous Recording.
Record On/Off
12
) is displayed in the channel, recording is enabled. If the Record icon is
).
REC icon