Recording; Continuous Recording; Event Recording - Digimerge DH100 Series Instruction Manual

RECORDING

By default, the system is set to immediately record at startup from connected cameras. This is
called Continuous Recording. It is highly recommended to keep Continuous Recording on at all
times.
The system can perform Continuous Recording, Event Recording, and Schedule Recording.
However, the system can only perform one type of recording at a given time.

Continuous Recording

By default, all camera channels are enabled with Continuous Recording. During Continuous
Recording, the Record icon (

Event Recording

The system includes three modes of event recording:
• Motion: The system marks video as an event when the camera detects motion.
• Alarm: The system marks video as an event when an alarm or sensor is triggered
• Video Loss: The marks video as an event when a camera is disconnected or suffers video
loss. The system employs a pre-record function to capture video seconds before the video loss
occurred
13
)appears in the channel.
REC icon