Remote Control - Digimerge DH100 Series Instruction Manual

REMOTE CONTROL

1. LOCK: Press to lock / unlock the system.
2. ESC: Press to exit from system menus.
3. Navigation/Menu:
Move cursor up within menus.
During playback, press to play
video in slow motion.
Move cursor to
the left within
menus. During
playback, press
to rewind video.
Move cursor down within
menus. During playback,
press to stop and exit playback.
• MENU: Press to open the Main Menu. During
playback, press to pause video.
• BACKUP: Press to open the Backup Menu.
• OSD: Toggle OSD on/off.
4. System configuration buttons:
• ENTER ( ): Press to confirm menu options/
selections.
• PLAY: During playback, press to play video.
• REC: Start/Stop system recording (must be within live viewing).
5. Viewing buttons:
• FREEZE: Pause the video during playback.
• ZOOM: Press to open the zoom field (live view, single channel only). Press again to zoom in.
• PIP: Open picture in picture mode.
• 4CH: View in quad mode.
• 8/16CH: View in 9-channel mode (8/16-channel only). 16-channel only: press 8/16CH
repeatedly to change between 9-channel and 16-channel displays.
• AUTO: Start sequence view.
6. Number keys:
• TIME SEARCH: Press to open the Time Search menu.
• 1~0: Press to view channels in full screen view. Press to enter numbers within menus.
• 16-channel only: press 10+ and then a number to view channels 10-16 (e.g. press 10+ then 0
to view channel 10, press 10+ then 1 to view channel 11, etc.).
• 10+ (INFO button): In live view, press to open the system information window. 16-channel only:
press 2 times to open system information window.
1
3
Move cursor to
the right within
menus. During
4
playback, press
to fast forward
video.
5
6
2
5