Backup; Usb Flash Drive - Digimerge Touch DH200 Series Instruction Manual

BACKUP

Backup critical video data on your system to a USB flash drive, external USB HDD, or an external
USB CD/DVD-RW drive (not included).
The system supports most major brands of USB flash drives with a capacity of 10 MB ~
NOTE:
4 GB. Most major brands of USB HDDs and CD/DVD-RW drives are supported.

USB Flash Drive

To backup recorded video:
1. Connect a blank USB flash drive to the USB
port on the front panel.
2. Format the USB flash drive if you have not
already done so. For details on formatting the
USB flash drive, see "DISK" on page 30.
3. Press the
BACKUP
4. Under DEVICE, make sure to select
.
PANEL)
5. Under SELECT, select specific cameras or
select ALL. Select
recording. Select all boxes if desired.
6. Under RANGE, enter date and time for the
system to scan for video. If the system finds a
file, it will immediately begin backing up the
data. Monitor the backup progress in the ACTION frame.
If there is no video available in the range, the system will prompt, "STATUS: NO FILE."
NOTE:
7. Under ACTION, select
8. Once backup is complete, press
9. You will be prompted to re-start recording on the system. Press
prompt, and
/
Recording.
32
button on the front panel.
USB (FRONT
, , or
NORMAL ALARM MOTION
and press
START
CANCEL/ESC
to resume Continuous Recording; press
Figure 20.0 Backup menu—USB flash drive
.
ENTER
to close remaining windows.
to close the
CANCEL/ESC
to resume Schedule
/