Attaching A Ferrite Core - Panasonic Pure IP-PBX KX-TDE600 Installation Manual

3.2.14 Attaching a Ferrite Core

3.2.14 Attaching a Ferrite Core
A ferrite core must be attached when:
•
an RJ45 connector is connected to IPCEMPR, IP-GW16 or IP-EXT16 cards, or
•
an Amphenol connector is connected to an extension card.
The ferrite core is included with the card.
Attaching to an RJ45 Connector
For the IPCEMPR Card
Wrap the cable once around the ferrite core, then close the case of the ferrite core. Attach the ferrite core 3
cm (1-3/16 in) away from the connector. The ferrite core is included with the PBX.
For IP-GW16/IP-EXT16 Cards
Wrap the cable once around the ferrite core, then close the case of the ferrite core. Attach the ferrite core 5
cm (1-15/16 in) away from the connector. The ferrite core is included with the card.
(1-15/16 in)
122 Installation Manual
3 cm
(1-3/16 in)
5 cm
Document Version 2009-12