Panasonic Pure IP-PBX KX-TDE600 Installation Manual page 10

Important Information
1.
Information stored on the SD Memory Card
Phonebook data, user IDs, system settings data, passwords (User/Administrator/Installer), Personal
Identification Numbers (PINs), etc.
2.
Information sent from the PBX to a PC or other external device:
Phone call data (including telephone numbers of outside parties), call charge data, etc.
Requirements
1.
The SD Memory Card contains software for all the processes of the PBX and all customer data. It can be
easily removed and taken away from the PBX by a third party. Therefore, do not allow unauthorized access
to prevent data leakage.
2.
Always make backups of data stored on the SD Memory Card. For details, refer to "2.6.2 Utility—File
Transfer PC to PBX (SD Card)" and "2.6.3 Utility—File Transfer PBX (SD Card) to PC" in the PC
Programming Manual.
3.
To prevent illegal access from the Internet, activate a Firewall.
4.
To avoid unauthorized access and possible abuse of the PBX, we strongly recommend:
a.
Keeping the password secret.
b.
Selecting a complex, random password that cannot be easily guessed.
c.
Changing your password regularly.
5.
Perform the following when sending the PBX for repair or handing it over to a third party.
a.
Make a backup of data stored on the SD Memory Card.
b.
Using an SD formatter, format the SD Memory Card so that information cannot be retrieved from it.
6.
To prevent data leakage, render the SD Memory Card physically unusable before disposal.
7.
When user information is sent from the PBX to a PC or other external device, the confidentiality of that
information becomes the responsibility of the customer. Before disposing of the PC or other external device,
ensure that data cannot be retrieved from it by formatting the hard disk and/or rendering it physically
unusable.
Notice
SAFETY REQUIREMENTS
For All Telephone Equipment
•
Read and understand all instructions.
For the PBX
•
When placing the metal bracket, make sure that the "TOP" arrow is pointing upward.
•
Keep the unit away from heating appliances and devices that generate electrical noise such as fluorescent
lamps, motors and televisions. These noise sources can interfere with the performance of the PBX.
•
If you are having problems making calls to outside destinations, follow this procedure to test the CO lines:
a.
Disconnect the PBX from all CO lines.
b.
Connect known working SLTs to those CO lines.
c.
Make a call to an external destination using those SLTs.
If a call cannot be carried out correctly, there may be a problem with the CO line that the SLT is connected
to. Contact your telephone company.
If all SLTs operate properly, there may be a problem with your PBX. Do not reconnect the PBX to the CO
lines until it has been serviced by an authorized Panasonic Factory Service Center.
10 Installation Manual Document Version 2009-12