Panasonic Pure IP-PBX KX-TDE600 Installation Manual page 110

3.2.9 Installing/Replacing the Power Supply Unit
The following procedures are for installing or replacing a PSU only. Do not replace or remove the PSU
for any other purpose.
Installing the Power Supply Unit
1.
Insert the PSU along the guide rails.
CAUTION
For safety reasons, do not touch parts in the PSU.
2.
Push the release lever in the direction of the arrow, so that the PSU engages securely with the connector
on the back board.
Release Lever
110 Installation Manual
Guide Rail
Back Board
Document Version 2009-12