Table of Contents
Advertisement
Intel® 5000 Series Chipsets Server Board Family Datasheet
Error Code
858C
DIMM_D1 Correctable ECC error encountered.
858D
DIMM_D2 Correctable ECC error encountered.
858E
DIMM_D3 Correctable ECC error encountered.
858F
DIMM_D4 Correctable ECC error encountered.
8600
Primary and secondary BIOS IDs do not match.
Override jumper is set to force boot from lower alternate BIOS bank of flash
8601
ROM
8602
WatchDog timer expired (secondary BIOS may be bad!)
8603
Secondary BIOS checksum fail
5.3.4
POST Error Beep Codes
The following table lists POST error beep codes. Prior to system Video initialization, BIOS uses
these beep codes to inform users on error conditions. The beep code is followed by a user
visible code on the diagnostic LEDs.
Beeps
Error Message
3
Memory error
6
BIOS rolling back
error
5.3.5
POST Error Pause Option
For POST error(s) that are listed as Pause, the BIOS enters the error manager and waits for the
user to press an appropriate key before booting the operating system or entering BIOS Setup.
The user can override this option by setting POST Error Pause to disabled in the BIOS Setup
utility Main menu page. If POST Error Pause is set to disabled, the system will boot the
operating system without user-intervention. The default value is set to enabled.
Revision 1.1
Error Message
Table 51. POST Error Beep Codes
POST Progress Code
System halted because a fatal error related to the memory
was detected.
The system has detected a corrupted BIOS in the flash
part, and is rolling back to the last good BIOS.
Intel order number D38960-004
Error Reporting and Handling
Response
Pause
Pause
Pause
Pause
Pause
Pause
Pause
Pause
Description
151
Advertisement
Table of Contents
