Table 80. Post Error Beep Codes - Intel S2600CO series User Manual

Appendix G: POST Code Errors
Error Code Error Message
8604 POST Reclaim of non-critical NVRAM variables
8605 BIOS Settings are corrupted
8606
NVRAM variable space was corrupted and has been reinitialized
92A3 Serial port component was not detected
92A9 Serial port component encountered a resource conflict error
A000 TPM device not detected.
A001 TPM device missing or not responding.
A002 TPM device failure.
A003 TPM device failed self test.
A100 BIOS ACM Error
A421 PCI component encountered a SERR error
A5A0 PCI Express component encountered a PERR error
A5A1 PCI Express component encountered an SERR error
DXE Boot Service driver: Not enough memory available to shadow a Legacy
A6A0
Option ROM
POST Error Beep Codes
The following table lists the POST error beep codes. Prior to system video initialization, the
BIOS uses these beep codes to inform users on error conditions. The beep code is followed by
a user-visible code on the POST Progress LEDs.
Beeps Error Message
1 USB device action
®
1 long Intel TXT security
violation
3 Memory error
The following Beep Codes are sounded during BIOS Recovery.
2 BIOS Recovery
started
4 BIOS Recovery
failure
The Integrated BMC may generate beep codes upon detection of failure conditions. Beep codes
are sounded each time the problem is discovered, such as on each power-up attempt, but are
not sounded continuously. Codes that are common across all Intel
that use same generation chipset are listed in the following table. Each digit in the code is
represented by a sequence of beeps whose count is equal to the digit.
150

Table 80. POST Error Beep Codes

POST Progress Code
NA
0xAE, 0xAF
Multiple
NA
NA
Intel order number G42278-004
Intel® Server Board S2600CO Family TPS
Description
Short beep sounded whenever a USB device is discovered
in POST, or inserted or removed during runtime
System halted because Intel
Technology detected a potential violation of system
security.
System halted because a fatal error related to the memory
was detected.
Recovery boot has been initiated
BIOS recovery has failed. This typically happens so quickly
after recovery us initiated that it sounds like a 2-4 beep
code.
®
server boards and systems
Response
Minor
Major
Major
Major
Major
Minor
Minor
Minor
Minor
Major
Fatal
Minor
Fatal
Minor
®
Trusted Execution
Revision 1.4