Mitsubishi Electric FR-D700 Instruction Manual page 69

Parameter list
Func-
Parameter Name
tion
Pr.CL Parameter clear
ALLC All parameter clear
Er.CL Faults history clear
Pr.CH Initial value change list
∗1 Differ according to capacities.
6%: FR-D740-022 or less, FR-D720S-042 or less
4%: FR-D740-036 to 080, FR-D720S-070 and 100
3%: FR-D740-120 and 160
∗2 Differ according to capacities.
5s: FR-D740-080 or less, FR-D720S-008 to 100
10s: FR-D740-120 and 160
∗3
Differ according to capacities.
6%: , FR-D720S-008 and 014
4%: , FR-D740-012 or more, FR-D720S-025 or more
∗4
Write is disabled in the communication mode (network operation mode) from the PU connector.
∗5 The parameter number in parentheses is the one for use with the operation panel (PA02) for the FR-E500 series or parameter unit (FR-PU04/FR-PU07).
∗6
The initial value differs according to the voltage class. (200V class, 400V class)
∗7
These parameters are communication parameters that are not cleared when parameter clear (all clear) is executed from RS-485 communication. (Refer to
page 175 for RS-485 communication)
∗8
Available only for the three-phase power input specification model.
64
Minimum Refer
Initial
Setting Range Setting to
Value
Increments Page
0, 1 1 0 239
0, 1 1 0 239
0, 1 1 0 241
— — — 240
Customer
Parameter Remarks
Setting
Pr.CL
ALLC
Er.CL
Pr.CH
Control Mode-based
Instruction Code
Correspondence Table
Read Write Extended Copy
V/F V/F V/F GP MFVC GP MFVC GP MFVC
— — — — —
— — — — —
— — — — —
— — — — —
Parameter list
Parameter
Clear All clear
— — —
— — —
— — —
— — —
4