Setting from the parameter unit and operation panel
4.22.5 Buzzer control (Pr. 990)
You can make the buzzer "beep" when you press the key of the parameter unit (FR-PU04/FR-PU07).
Parameter
Number
990
PU buzzer control
The above parameters can be set when Pr. 160 Extended function display selection = "0". (Refer to page 157)
The above parameters allow its setting to be changed during operation in any operation mode even if "0" (initial value) is set in Pr. 77 Parameter write
selection.
4.22.6 PU contrast adjustment (Pr. 991)
Contrast adjustment of the LCD of the parameter unit (
Decreasing the setting value makes contrast light.
Parameter
Number
991
PU contrast adjustment
The above parameter is displayed as simple mode parameter only when the parameter unit FR-PU04/FR-PU07 is connected.
The above parameters allow its setting to be changed during operation in any operation mode even if "0" (initial value) is set in Pr. 77 Parameter write