National Instruments FieldPoint FP-2000 User Manual page 94

time server
choosing IP address, A-1
configuring IP address, 3-5
resetting with Reset switch, B-1
setting FP-20xx internal clock, 3-5
timestamp
shown in FieldPoint Explorer, 3-14
troubleshooting invalid values, C-2
training
customer, F-1
troubleshooting
Comm Resource Configuration dialog
box errors, C-1
invalid timestamp values, C-2
IP configuration errors, C-2
No Modules Found error, C-3
No Software Installed status, C-3
Remote System Explorer browse
errors, C-1
runaway startup applications, C-4
STATUS LED error indications
(table), C-4
troubleshooting resources, F-1
© National Instruments Corporation
U
UDP data communication, 3-23
upgrading software on the FP-20xx, D-1
V
VIs. See LabVIEW VIs
W
watchdog, 4-1, 5-11
Web
professional services, F-1
technical support, F-1
wiring
Ethernet cables, E-3
Ethernet connections, 2-12
field devices, 2-15
power, 2-13
power (figure), 2-14
worldwide technical support, F-2
writing to an output channel, 3-15
I-7 FP-2000/2010/2015 User Manual
Index