National Instruments FieldPoint FP-2000 User Manual page 90

downloading configuration, 3-14
embedded applications. See embedded
applications on FP-20xx
feature set, 4-1
hardware watchdog, 5-11
host names, A-3
HotPnP (Hot Plug and Play), 4-3
installation
connecting to network, 2-11
mounting FP-20xx on DIN rail, 2-4
mounting FP-20xx to panel, 2-7
internal clock, 3-5
IP address, 3-3, A-1
limiting host access to LabVIEW RT
engine, 5-4
locking/unlocking configuration, 3-13
network watchdog, 4-1
overview, 1-1
power supply to I/O modules, 2-14
powering, 2-13
figure, 2-14
powering up, 2-15
resetting to factory settings, B-1
RS-232 serial port, 4-7
safety information, 2-1
saving configuration as power-up
state, 3-10
security settings, 3-12
setup overview, 1-4
snapshot feature, 4-2
specifications, E-1
targeting LabVIEW RT to the
FP-20xx, 5-1
TCP/IP settings, A-4
transferring files to and from
FP-20xx, 5-11
using with host PC software
DataSocket communication, 3-20
LabVIEW, 3-17
LabVIEW Publish Data VI, 3-23
LabVIEW serial VIs, 3-23
© National Instruments Corporation
LabVIEW TCP and UDP VIs, 3-23
LabWindows/CVI, 3-18
Lookout, 3-16
OPC server, 3-19
overview, 3-16
FTP
National Instruments FTP site, 1-3
RT Engine FTP server, 5-11
G
gateway IP address
choosing values, A-1
configuring, 3-4
resetting with Reset switch, B-1
H
help
professional services, F-1
technical support, F-1
host access, limiting, 3-12
host name, A-3
configuring, 3-4
Hosts files
Windows 2000/NT/XP, A-3
Windows 98/95, A-3
HotPnP (Hot Plug and Play)
I/O module configuration after HotPnP
replacement (table), 4-4
overview, 4-3
I
I/O modules
configurable power-up state, 4-3
configuration, 3-6
configuration after HotPnP replacement
(table), 4-4
connecting to field devices, 2-15
inserting, 4-3
I-3 FP-2000/2010/2015 User Manual
Index