National Instruments FieldPoint FP-2000 User Manual page 34

© National Instruments Corporation
2. After the FieldPoint modules are found, click the + sign next to FP Res
in the left pane to expand the device hierarchy and display the modules
found on the network, as shown in the following figure.
The hierarchy includes all of the modules connected to the FP-20xx.
The default name of each device found includes the name of the
FieldPoint module, followed by a space, the @ sign, and the address of
the module (for example,
one I/O Item is created for each channel on the module, and if all the
channels are of the same type, one I/O Item is created to represent all
the channels on that module collectively.
Chapter 3
FP-2000 @0
3-7
Hardware and Software Configuration
). For each module found,
FP-2000/2010/2015 User Manual