National Instruments FieldPoint FP-2000 User Manual page 35

Chapter 3 Hardware and Software Configuration
FP-2000/2010/2015 User Manual
3. To configure the hardware settings of a particular I/O module,
right-click the device name and select Edit this device. The Device
Configuration dialog box appears, as shown in the following figure.
For output modules, you can choose settings for Watchdog
Configuration. Refer to the
(Network Watchdog)
for more information about the network watchdog feature.
Guarding against Network Failures
section of Chapter 4,
3-8
Feature Set Description,
ni.com