National Instruments FieldPoint FP-2000 User Manual page 79

Installing LabVIEW RT Software
Viewing Information about Installed Software
Installing or Upgrading LabVIEW RT on the FP-20xx
© National Instruments Corporation
To view the software installed on your FP-20xx, right-click the FP-20xx
in Remote System Explorer and select View Installed Software. If your
FP-20xx has LabVIEW RT installed, the Currently Installed Software
dialog box displays the software and version numbers, as shown in the
following figure.
Your FP-20xx has LabVIEW RT pre-installed. However, if the FP-20xx
STATUS LED flashes three times, and its status in Remote System
Explorer is
No software installed
case, you should re-install or upgrade the LabVIEW RT software.
Complete the following steps to install or upgrade the LabVIEW RT
software on your FP-20xx:
1. Run Remote System Explorer: right-click the Comm Resource in
FieldPoint Explorer, choose Edit this comm resource, and click
Browse.
, the FP-20xx is in safe mode. In this
D-1
D
FP-2000/2010/2015 User Manual