Rt Target: Miscellaneous - National Instruments FieldPoint FP-2000 User Manual

Chapter 5 LabVIEW RT Programming
or an IP address fail and slow down the system. Place frequently matched entries toward
the bottom of the RT Target Access List to improve system performance.

RT Target: Miscellaneous

FP-2000/2010/2015 User Manual
Use RT Target: Miscellaneous options to launch LabVIEW RT
applications at system startup and to specify the Downloaded VI Path.
Complete the following steps to open the RT Target: Miscellaneous
dialog box:
1. Target LabVIEW RT to the FP-20xx. Refer to the
RT to the FP-20xx
2. Select Tools»Network Options.
3. Select RT Target: Miscellaneous from the pull-down menu to see the
following dialog box.
Use the Application Path and Launch Application at Boot-up settings to
automatically launch a built LabVIEW RT application when you start up
the FP-20xx. The LabVIEW RT Engine launches the built application
specified by Application Path when you start up the FP-20xx. The
specified path also determines the path and application name that appear
when you target LabVIEW RT to the FP-20xx and create an embedded
LabVIEW RT application. Refer to the
FP-20xx
and Launching Embedded Applications at Startup
more information about embedding and launching LabVIEW RT
applications on the FP-20xx.
section for more information.
Embedding Applications on the
5-6
Targeting LabVIEW
sections for
ni.com