Table of Contents
Advertisement
84
Result: Alternately for step 5.1, the home page does not appear in your default Web
Browser. In this case, navigate to the CD in Windows Explorer, and double-click the
readme.html file on the root of the CD.
6.
Under the D20MX Factory Default Configuration Files section, click on the link
named ConfigPro.
Result: The Factory Default Configuration Files folder appears.
7.
Using Windows Explorer, copy/paste the files as shown in the following table. To copy
a file, select it and press Ctrl-C. To paste a file, click on the Windows Explorer window
showing the new D20MXV14X folder and press Ctrl-V.
Navigate to folder on D20MX Documentation CD or
Folder extracted from the Zip File
MX01-14X.zip
MX02-14X.zip
Result: The files shown in the above table appear in the new D20MXV14X folder of the
Windows Explorer window.
8.
Start Config Pro 5.03 or higher.
Result: The main window of ConfigPro appears with the tree view of the project
directory on the left.
9.
Choose the D20MX Factory Default Configuration file, MX01-14X.zip or MX02-14X.zip.
based on the following criteria:
–
If transferring a configuration containing B009 versions greater than 310 and
B021 versions greater than 912 use the file MX01-14X.zip
–
If transferring a configuration containing B009 versions less than or equal to 310
and B021 versions less than or equal to 912, use the file MX02-14X.zip.
10. If the MX01-14X or MX02-14X default configuration has already been imported, go to
step 18. Otherwise, select from the menu bar Project > Archive Project > Restore.
Result: The Restore Project from ZIP File dialog appears
11. Under the Select Source Project ZIP File area, click the document icon.
Result: The Select a Project ZIP file to Restore dialog appears.
12. Navigate to the new D20MXV14X folder.
Result: The two files MX01-14X.zip and MX02-14X.zip appear in the dialog.
13. Select the appropriate file based on your decision made in the second step and click
the Select button.
Result: The Restore Project from ZIP File dialog appears with the selected file showing
under the Select Source Project ZIP File area.
14. Under the "Restore To" area, click the folder icon.
Result: The Select the Destination Project Directory dialog appears.
15. Navigate to your ConfigPro project folder on a hard drive of the configuration
computer. The project folder is typically named C:\WESDATA.
Result: The contents of the project folder are displayed, and the file named
WPL400.DB is selected.
16. Click the Select button.
Result: The Restore Project from ZIP File dialog reappears with the Project Directory set
to the folder you selected in the previous step.
17. Change the Project Name if desired and click OK.
Result: The main window of ConfigPro appears with the tree view of the project
directory on the left. The new D20MX factory default project appears in the tree view.
18. Double-click on the D20MX factory default project.
CHAPTER 5: CONFIGURING THE SOFTWARE
GE INFORMATION
Copy/Paste the following files to the
new folder D20MXV14X
MX01-14X.zip
MX02-14X.zip
D20MX INSTRUCTION MANUAL
Advertisement
Table of Contents
