Table of Contents
Advertisement
APPENDIX D: USING CONFIGPRO WITH D20MX
D20MX INSTRUCTION MANUAL
3.6.1. For LAN-based D20MX configurations, ensure that the BOOTP Settings
option is disabled; select the Not Used option.
3.6.2. The Services settings highlighted below are used for remote connection
into the RTU. If not included in the Services settings, the defaults for
WesmaintSSH and CommandSSH are 22 and 922 respectively. If
included, these ports can be changed to customized numbers:
– WesmaintSSH allows remote access to the wesmaint menu.
– CommandSSH allows remote access to SFTP and the D20M shell.
These are both TCP connections.
4.
Click OK when the D20MX device properties are set.
Result: The applications present in the SAN firmware are applied to this new D20MX
device.
GE INFORMATION
125
Advertisement
Table of Contents
