APPENDIX D: USING CONFIGPRO WITH D20MX
D20MX INSTRUCTION MANUAL
5.4.
Configure the LAN Redundancy Manager (B119-1N) application.
Note: If the LAN Redundancy Manager (B119-1N) application in the Data
Translation Applications tab is enabled, its pseudo point descriptions must be
correctly set. Complete the following steps to ensure this.
5.4.1. Go to the D20MX device being modified. Double-click the device.
Navigate to the System point database Applications tab. Double-click
the System Point Database application. Select the LAN Redundancy
Manager from the list of applications. Click Descriptors. Click the Import
icon.
GE INFORMATION
127