Table of Contents
Advertisement
Door Handle
The door handles are similar in design to the E46
and pull out and upward for opening. Removal of
the handles is also similar to the E46.
There are no serviceable components on the
lock/latch. The assembly must be replaced as a
unit.
The lock cylinder is removed by removing the
torx screw through the access hole in the door.
Once the screw is removed, the lock cylinder can
be pushed out of the handle assembly.
41530011
Hex Nut
The handle is removed by loosening the hex nut
holding the handle to the latch mechanism.
41530007
The handle is then removed by pulling it out and
down to release it from the latch. The handle is
turned down to the left to release it from the door
latch assembly.
41530008
8
Advertisement
Table of Contents
