Installing The Throttle Body Joints - Yamaha YZFR6X(C) 2008 Service Manual

Digital circuit tester
90890-03174
Model 88 Multimeter with
tachometer
YU-A1927
c. Measure the throttle position sensor volt-
age.
d. Adjust the throttle position sensor angle so
that the voltage is within the specified
range.
Output voltage
0.630–0.730 V
e. After adjusting the throttle position sensor
angle, tighten the throttle position sensor
screws "4".
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
ET2C01009

INSTALLING THE THROTTLE BODY JOINTS

1. Install:
• Throttle body joints "1"
Throttle body joint bolt
10 Nm (1.0 m·kg, 7.4 ft·lb)
NOTE:
Be sure to install the throttle body joints with
the "L" mark onto the throttle body openings for
cylinders #1 and #2 and the joints with the "R"
mark onto the openings for cylinders #3 and
#4.
THROTTLE BODIES
L
7-14
R
1