Yamaha YZFR6X(C) 2008 Service Manual page 202

2
4. Install:
• Swingarm pivot shaft ring nut "1"
Swingarm pivot shaft ring nut
95 Nm (9.5 m·kg, 70 ft·lb)
NOTE:
• Lubricate the swingarm pivot ring nut threads
and mating surfaces with lithium-soap-based
grease.
• Tighten the swingarm pivot shaft ring nut with
the ring nut wrench "2".
Ring nut wrench
90890-01507
1
5. Install:
• Swingarm pivot shaft nut
Swingarm pivot shaft nut
70 Nm (7.0 m·kg, 52 ft·lb)
NOTE:
Lubricate the swingarm pivot shaft nut threads
and mating surfaces with lithium-soap-based
grease.
6. Adjust:
• Drive chain slack
Refer to "ADJUSTING THE DRIVE
CHAIN SLACK" on page 3-26.
1
2
4-67
SWINGARM
Drive chain slack
30.0–45.0 mm (1.18–1.77 in)