Yamaha YZFR6X(C) 2008 Service Manual page 377

Yamaha motorcycle
Hide thumbs Also See for YZFR6X(C) 2008:
Table of Contents

Advertisement

Fault code No.
19
Diagnostic code No.
Item/components and probable
Order
cause
1
Connections
• Main wire harness ECU coupler
2
Open or short circuit in wire harness.
3
Defective sidestand switch.
Fault code No.
20
Diagnostic code No.
Item/components and probable
Order
cause
1
Defective intake air pressure sensor or
atmospheric pressure sensor.
Open circuit is detected in the input lead from the side-
Symptom
stand switch to the ECU.
20
Sidestand switch
Check or maintenance job
• Execute the diagnostic mode.
• Check the coupler for any pins
• Check the locking condition of
• If there is a malfunction, repair
• Repair or replace if there is an
• Between ECU coupler and
• Between relay unit coupler and
• Between sidestand switch cou-
• Replace if defective.
When the main switch is turned to "ON", the atmospheric
Symptom
pressure sensor voltage and intake air pressure sensor
voltage differ greatly.
03
Intake air pressure sensor
02
Atmospheric pressure sensor
Check or maintenance job
• Execute the diagnostic mode.
• Replace if defective.
8-54
FUEL INJECTION SYSTEM
(Code No. 20)
that may be pulled out.
the coupler.
it and connect the coupler
securely.
open or short circuit.
relay unit coupler.
(blue/yellow–blue/yellow)
sidestand switch coupler.
(blue/black–blue/black)
pler and engine ground.
(black–black)
Refer to "CHECKING THE
SWITCHES" on page 8-81.
(Code Nos. 03, 02)
Refer to"CHECKING THE
INTAKE AIR PRESSURE SEN-
SOR" on page 8-100 or
"CHECKING THE ATMO-
SPHERIC PRESSURE SEN-
SOR" on page 8-99.
Reinstatement
method
If the transmis-
sion is in gear,
retracting the
sidestand.
If the transmis-
sion is in neu-
tral,
reconnecting
the wiring.
Reinstatement
method
Turning the
main switch to
"ON".

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yzfr6x 2008R6 2008

Table of Contents