EAS25420
CHECKING THE SHIFT SHAFT
1. Check:
• Shift shaft
Bends/damage/wear → Replace.
• Shift shaft spring
Damage/wear → Replace.
EAS25430
CHECKING THE STOPPER LEVER
1. Check:
• Stopper lever
Bends/damage → Replace.
Roller turns roughly → Replace the stop-
per lever.
• Stopper lever spring
Damage/wear → Replace.
EAS25450
INSTALLING THE SHIFT SHAFT
1. Install:
• Shift shaft spring stopper "1"
• Shift shaft assembly
• Shift shaft spring "2"
Shift shaft spring stopper
22 Nm (2.2 m·kg, 16 ft·lb)
®
LOCTITE
NOTE:
• Lubricate the oil seal lips with lithium-soap-
based grease.
• Hook the end of the shift shaft spring onto
the shift shaft spring stopper.
• Hook the ends of the stopper lever spring "3"
onto the stopper lever "4" and the crankcase
boss "5".
• Mesh the stopper lever with the shift drum
segment assembly.
4
2
1
5
3
5-47
SHIFT SHAFT