Changing The Tail/Brake Light Bulb - Yamaha YXR70FX Service Manual

CHANGING THE HEADLIGHT BULBS/

CHANGING THE TAIL/BRAKE LIGHT BULB

4. Remove:
• headlight bulb holder 1
• bulb
TIP:
Remove the headlight bulb holder by pushing
it in and turning it counterclockwise.
WARNING
Keep flammable products and your hands
away from the bulb while it is on, since it
will be hot. Do not touch the bulb until it
cools down.
5. Install:
• bulb New
Secure the new bulb with the headlight bulb
holder.
NOTICE
Avoid touching the glass part of the bulb.
Keep it free from oil; otherwise, the trans-
parency of the glass, life of the bulb, and
luminous flux will be adversely affected. If
oil gets on the bulb, thoroughly clean it
with a cloth moistened with alcohol or lac-
quer thinner.
6. Install:
• headlight bulb holder
• headlight bulb holder cover
• cover at the rear of the headlight
7. Close the hood.
8. Install:
• headlight bulb holder (with bulb)
• headlight bulb holder cover
9. Close the hood.
CHANGING THE TAIL/BRAKE LIGHT BULB
1. Lift the cargo bed up.
2. Remove:
• cargo bed panel 1
3 - 65
CHK
ADJ