Instrument Functions - Yamaha YXR70FX Service Manual

1
8
7
6
2
1

INSTRUMENT FUNCTIONS

2
5B410004
Multi-function meter unit
1 Speedometer
2 Fuel meter
3 "H" button
3
4 "M" button
4
5 Clock/Hour meter/Voltage display
6 Odometer/Tripmeter A/Tripmeter B
7 "TRIP/ODO" button
5
8 Clock/Hour button "
The multi-function meter unit is equipped with
the following:
• a speedometer (which shows the riding
• an odometer (which shows the total dis-
• two tripmeters (which show the distance
• a clock
• an hour meter (which shows the total time
• a voltage display (which shows the battery
• a fuel meter
• a self-diagnosis device
Odometer and tripmeter modes
1 Odometer/Tripmeter A/Tripmeter B
2 "TRIP/ODO" button
Pushing the "TRIP/ODO" button switches the
display between the odometer mode "ODO"
and the tripmeter modes "A" and "B" in the fol-
lowing order:
ODO → TRIP A → TRIP B → ODO
To reset a tripmeter, select it by pushing the
"TRIP/ODO" button, and then hold the "TRIP/
ODO" button for at least three seconds. The
tripmeters can be used to estimate the dis-
tance that can be traveled with a full tank of
fuel. This information will enable you to plan
future fuel stops.
Pushing and holding in the "TRIP/ODO" but-
ton, and turning the key to "ON" while the but-
ton is pushed, switches the display between
"mph" and "km/h".
1 - 4
FEATURES
/
speed)
tance traveled)
traveled since they were last set to zero)
the engine has been running)
voltage)
GEN
INFO
"