Changing The Tail/Brake Light Bulb - Yamaha 2004 YXR660 Service Manual

CHANGING THE HEADLIGHT BULB/

CHANGING THE TAIL/BRAKE LIGHT BULB

5. Install:
• headlight bulb holder (with bulb)
• headlight bulb holder cover
6. Close the hood.
CHANGING THE TAIL/BRAKE LIGHT BULB
1. Remove:
• cargo bed panel 1
2. Remove:
• tail/brake light bulb holder (with bulb) 1
• bulb
NOTE:
Turn the bulb holder counterclockwise and
remove the defective bulb.
WARNING
Keep flammable products and your hands
away from the bulb while it is on, since it
will be hot. Do not touch the bulb until it
cools down.
3. Install:
• bulb
New
Secure the new bulb with the tail/brake light
bulb holder.
CAUTION:
Avoid touching the glass part of the bulb.
Keep it free from oil; otherwise, the trans-
parency of the glass, life of the bulb, and
luminous flux will be adversely affected. If
oil gets on the bulb, thoroughly clean it
with a cloth moistened with alcohol or lac-
quer thinner.
3 - 52
CHK
ADJ