Yamaha YXR70FX Service Manual page 24

1
Clock and voltage display modes
1 Clock/Hour button "
2 "H" button
3 "M" button
4 Clock/Hour meter/Voltage display
2
Pushing the "
3
play between the clock mode "CLOCK", the
hour meter mode "HOUR", and the voltage dis-
play mode "btry" in the following order:
4
CLOCK → HOUR → btry → CLOCK
To set the clock
1. Set the display to the clock.
2. Push the "
3. Set the hours by pushing the "H" button.
4. Set the minutes by pushing the "M" but-
5. Push the "
Voltage display mode
This display shows the battery voltage. "btry"
appears for 1 second when the voltage display
mode is first selected, and then the battery
voltage is shown.
If the battery voltage is less than 10 volts, "LO"
is displayed and if the voltage is above 16
volts, "HI" is displayed.
TIP:
"LO" or "HI" is displayed only if the low or high
battery voltage is detected for 16 seconds or
more.
NOTICE
If the voltage display indicates "LO" or "HI",
there may be trouble with the battery charging
circuit or the battery may be faulty. If "LO" or
"HI" appears in the display, check the vehicle.
1 - 5
FEATURES
INFO
/ "
/ " button switches the dis-
/ " button until the clock
starts flashing.
ton.
/ " button, and then
release it to start the clock.
GEN