Yamaha YXR70FX Service Manual page 150

CHANGING THE TAIL/BRAKE LIGHT BULB
3. Remove:
• tail/brake light bulb holder (with bulb) 1
• bulb
TIP:
Turn the bulb holder counterclockwise and
remove the defective bulb.
WARNING
Keep flammable products and your hands
away from the bulb while it is on, since it
will be hot. Do not touch the bulb until it
cools down.
4. Install:
• bulb
New
Secure the new bulb with the tail/brake light
bulb holder.
NOTICE
Avoid touching the glass part of the bulb.
Keep it free from oil; otherwise, the trans-
parency of the glass, life of the bulb, and
luminous flux will be adversely affected. If
oil gets on the bulb, thoroughly clean it
with a cloth moistened with alcohol or lac-
quer thinner.
5. Install:
• tail/brake light bulb holder (with bulb)
6. Install:
• cargo bed panel
3 - 66
CHK
ADJ
· ·
7 Nm (0.7 m kg, 5.1 ft lb)