Trunking; Analog Trunk - New Rock Technologies OM10 User Manual

Figure 2-11 Department configuration interface
Department setting interface is mainly used for setting department (group) name, with which is filled
in the blanks. Intra-department pickup and assistant functions will use the department information.
After the department is set, it will appear on the dropdown list under "Department" on the "Extension
> Analog Ext." and "Extension > IP Ext." configuration interface for extension management and
assistant.

2.5 Trunking

2.5.1 Analog Trunk

After login, click "Trunking > Analog Trunk" tab to open the configuration interface.
Figure 2-12 Configuration interface of analog trunk
Table 2-11 Configuration parameter of analog trunk
Name
ID
Phone Number
Enable
Shanghai New Rock Technologies Inc.
Description
Analog trunk ID, which is automatically created by the system.
Assign a phone number for this trunk line. When there is no caller ID
display, the system will use this number as the caller ID. This number is
also used in the Call Detail Record (CDR).
Enable this analog line. If FXO port fails or other maintenance happens,
it is suggested to disable this line to ensure it will not be selected when
making outgoing calls.
Page37/75