Table 2-26 Routing Table Format - New Rock Technologies OM10 User Manual

Ip-pbx series
Table of Contents

Advertisement

For example: "IP 800[0-3] ROUTE FXO 1,2,3,4" means routing calls from IP with called number
between 8000~8003 to FXO port in a sequential selecting order of 1, 2, 3, 4. Namely, FOX Port 2 is
selected when FXO Port 1 is busy and so on.
Detailed definitions of source and number, number transformation methods and routing destination
are shown below.

Table 2-26 Routing Table Format

Name
Source
Number
Table 2-27 Number Transformations
Processing Mode
KEEP
REMOVE
Shanghai New Rock Technologies Inc.
Description
There are three types of source: IP, FXS and FXO.
Among them, IP source can be any IP address and is denoted by "IP"; "IP
[xxx.xxx.xxx.xxx]" is used to denote specific IP address; "IP
[xxx.xxx.xxx.xxx: port]" is used to denote specific IP address with port
number.
FXS and FXO ports can be any port, represented with "FXS" or "FXO";
special lines can be represented with FXS or FXO + port number, e.g.
FXS1, FXO2 or FXS [1-2], etc.
It could be a calling number with the form of CPN + number or a called
number with the form of number. The number may be denoted with digit
0-9,"*",".","#"," x ", etc., and uses the same regular expression as that of
dialing rules. Here are some of the form of number:
Designate a specific number: eg.114,61202700;
Designate a number matching a prefix: such as 61xxxxxx. Note: the
matching effect of 61xxxxxx is different from that of 61x or 61.
Specify a number scope. For example, 268[0-1,3-9] specifies any
4-digit number starting with 268 and followed by a digit between 0-1or
3-9;
Note: Number matching follows the principle of "minimum matching ".
For example: x matches any number with at least one digit; xx matches
any number with at least two-digit; 12x matches any number with at least
3-digit starting with 12.
Description and Example
Keep number. The positive number behind KEEP means to keep several
digits in front of the number; the negative number means to keep several
digits at the end of the number.
Example: FXS
02161202700
Keep the last 8 digits of the called number 02161202700 for calls from
FXS. The transformed called number is 61202700.
Remove number. The positive number behind REMOVE means to remove
several digits in the front of the number; the negative number means to
remove several digits at the end of the number.
For example: FXS
021
Remove 021 of the called number beginning with 021 for calls from FXS.
KEEP
-8
REMOVE
3
Page57/75

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Om20Om200

Table of Contents