System Tool; Change Password - New Rock Technologies OM10 User Manual

Figure 2-36 Interface of debugging log management
Table 2-35 Configuration parameters of debugging log management
Title
Log download
System log server
Log server
Log level
Procedure of downloading the debugging log:
Step 1: Click "download", the OM starts pack the logs.
Step 2: After few seconds, the interface of log save will appear.
Step 3: click "Save", and select path to save.
Step 4: The user may review the log from the server concerned.
2.9

System tool

2.9.1 Change password

After login, click the label of "Tools" to open this interface. Only administrator is entitled to change
the password of login.
For changing administrator password, it's required to enter new password into "New password" field
and "Confirm new password" field, then click "Submit".
The password being used by operator will be displayed as hidden codes, which could be changed by
administrator at any time. The administrator is allowed to change the operator's password by entering
new password into "Operator password>password".
Shanghai New Rock Technologies Inc.
Explanation
See the description below.
Set the IP address of system log server.
IP address of debugging log server.
Select the log file level of OM, default is 3. The setting range is 1 ~ 5,
the higher the level goes, the more details the log file will be.
Note: log level should be set to be 3 or lower when OM is used in
normal operation, avoiding influencing the system performance.
Page68/75