Buttons Used On Om Web-Based Utility; Basic Configuration; Network Configuration - New Rock Technologies OM10 User Manual

2.2 Buttons Used on OM Web-based Utility

"Submit" and "Refresh" buttons are at the bottom of configuration interface.
Submit" Button: Submit configuration information. Users click "Submit" button after completion
of parameter configuration on a page. A success prompt will appear if configuration information
is accepted by the system; if a "The configuration takes effect after the system is restarted"dialog
box appears, it means that the parameters are valid only after system restart; it is recommended
that users press the "Rstart" button on the "Tool" page to validate the configuration after
changing all parameters to be modified.
"Refresh": Cancel changed operation that has not been submitted.

2.3 Basic Configuration

2.3.1 Status
After login, click "Basic > Status" tab to open the status interface.
Figure 2-2 Status Interface

2.3.2 Network Configuration

After login, click "Basic > Network" tab to open the configuration interface.
Shanghai New Rock Technologies Inc. Page23/75