Functional Keys - New Rock Technologies OM10 User Manual

Table 2-18 Configuration parameter of call record
Name
CDR Server
Filter

2.6.6 Functional keys

The function key consists of system function key and service function key. The system function key
is used for acquiring OM information, and the later is used for users to activate, inactivate extension
features.
After login, click the label of "System> Functional Keys" to open this interface.
The following are the examples of the dialing rule for the function key:
a) Using *xx (dial * and 2 digits number ) to activate a service;
b) Using #xx (dial # and 2 digits number) to cancel a service.
Illustrate with following defaults of various parameters, which may be modified according to
requirements.
Figure 2-21 Functional keys configuration interface
Table 2-19 The use of feature codes
System Codes
Inquiry of IP address
Inquiry of extension number
Making Recording of Voice files
Start recording
Replay
Shanghai New Rock Technologies Inc.
Description
Set the IP address and port number of server for storing call records.
Note: If port number is not configured, the default port number 1809 will
be used.
Select what calls are not recorded: None or Internal calls.
Pick up the phone on any extension + ##
Pick up the phone of the extension + #00
Pick up the phone of any extension + *81 + hang up after
recording
Pick up the phone + *82
Page46/75