Figure 2-3 Network Configuration Interface - New Rock Technologies OM10 User Manual

Figure 2-3 Network Configuration Interface

Table 2-3 Configuration parameter of Network
Name
Host name
Logical IP address
ETH
MAC address
IP address
assignment
User name
Password
Shanghai New Rock Technologies Inc.
Description
This is the equipment name of OM. The default values of OM10, OM20,
OM100 and OM200 are Officium10, Officium20, Officium100 and
Officium200 respectively. Users can set a different name for each OM to
distinguish from each other according to the deployment plan.
A host name can be a maximum of 48 characters, either letters (A-Z or
a-z), numbers (0-9) and minus sign (-). It may not be null or space, and it
must start with a letter.
This parameter only exists in OM100 and OM200, used to display the
actual OM IP address in use.
Display the MAC address of OM.
Methods for obtaining an IP address
Fixed: Static IP address is used;
DHCP: Activate DHCP service and use the dynamic host configuration
protocol (DHCP) to allocate IP addresses and other network
parameters;
PPPoE: PPPoE service is used.
Enter an authentication user name if PPPoE service is selected, and there
is no default value.
Enter an authentication password if PPPoE service is selected, and there
is no default value.
Page24/75