Figure 2-7 Others Configuration Interface Of Analog Extension - New Rock Technologies OM10 User Manual

Figure 2-7 Others configuration interface of analog extension

Table 2-7 Others configuration parameter of analog extension
Name
CF
CFU
CFB
CFNR
CRBT
CRBT ID
SPD
SPD dial list
Shanghai New Rock Technologies Inc.
Description
Select if Call Forwarding is activated on this line. By default, this is
activated.
If it is required to forward all incoming calls unconditionally, enter the
new destination number here.
If it is required to forward an incoming call when it is busy, enter the
new destination number here.
If it is required to forward an incoming call when there is no answer,
enter the new destination number here.
Select if CRBT is activated on this line.
Set the CRBT number with a valid rang of 0~255, where 0 indicates
disabling CRBT. The default value is 0.
Select if the Speed dials is activated on this line. By default, this is not
selected.
If the Speed dials is activated on this line, enter the speed dials list.
The abbreviated number consists of max 30 pairs of "abbreviated
number-real number" with an minus sign between them; "abbreviated
number-real number" pairs are separated by "/"; the value range of
abbreviated number is 20 ~ 49. For example:
20-61202700/23-13052475522/30-96961. Users can set the list on a
telephone set and display it here.
Page31/75