Restore Factory Settings; Tdm Capture; Ethereal Capture; Product Information - New Rock Technologies OM10 User Manual

2.9.7 Restore factory settings

After login, click "Tools > Restore factory settings" to restore the parameters of OM into the factory
settings.
The factory settings are designed based on common applications, and therefore, no need to modify
them in many deployment situations.

2.9.8 TDM Capture

After login, click "Tools > TDM Capture" to open the capture interface.....
This tool is used to capture the received TDM signal on a FXS or FXO port. The maximum length of
the capture is 200 seconds. The capture is stored in the flash memory of the device in TDM format,
which is readable with reader such as CoolEditor.
Capture process:
Step 1
Selecting by clicking
signal.
Step 2
Click "Start" to begin the capture process.
Step 3
Click "Stop" to end the capture. You will be prompt to download. Download the capture file to the
designated PC.

2.9.9 Ethereal capture

After login, click "Tools > Ethereal capture" to open the interface of the tool.....
This tool is used to capture the tcpdump of the device. Up to 3 files each with Max. 3 M bytes in size
can be generated. The captured files are stored on the flash memory of the device in dump.cap format,
which is readable by Ethereal.
Steps for capture:
Step 1
Click "Start" to begin the capture process. You will be notified if there is a on-going capture already.
Step 2
Making the call which you want to capture.
Step 3
Click "Stop" to end the capture process. You will be notified for download. Download the file to the
designated PC.

2.10 Product information

After login, click "Info" to view the OM hardware and software version information.
Figure 2-45 Configuration interface of product information
Shanghai New Rock Technologies Inc.
, or manually enter the port from which you want to capture the TDM
Page72/75