Figure 1-9 Schematic Diagram For Front Panel Of Om200 Dual-Chassis System - New Rock Technologies OM10 User Manual

Ip-pbx series
Table of Contents

Advertisement

Table 1-22 Meanings of OM200 Indicators
Mark
Function
Power
PWR
indication
Status
STU
indication
Alarm
ALM
Indication
After normal startup of OM200, the indicator displaying letter C flash indicates that OM200 has
detected IP address conflicts.
OM200 single-chassis system can provide up to 48-line with different analog line type configuration
combinations, and OM200 dual-chassis system (main chassis and expansion chassis) can provide
maximum of 96-line with different analog line type configuration combination. OM200 dual-chassis
system is a logical integrated system formed by adding an expansion chassis and interface cards on
top of the single chassis system. An expansion cable is required to connect the two chassises, and the
operation of the main chassis will not be affected when connecting the expansion cable, suitable for
on-site capacity expansion. The system resources (e.g. number of concurrent calls) are determined by
the main chassis, so users who are planning to expand capacity should take into account the needs for
future system resources when initially ordering the single-chassis system, to support the smooth
capacity expansion and upgrade.

Figure 1-9 Schematic Diagram for Front Panel of OM200 Dual-Chassis System

Numbering definition of system interface slots: On the left side of main chassis is #1 slot (marked
with ① in Figure 1-9), on the right side of main chassis is #2 slot (marked with ③ in the Figure
1-9), on the left side of expansion chassis is #3 slot (marked with ② in the Figure 1-9), and on the
right side of expansion chassis is #4 slot, marked with ④ in Figure 1-9).
Shanghai New Rock Technologies Inc.
Status
Description
Green
Power on
Off
Power off
Off
System locked and inactive
Green flash
In normal operation
System in the process of power up and not in the
Constant red
normal operation mode
System in a diagnostic mode and able to execute
Red flash
limited operation
Green
No alarms
Red Flash
New alarms occurred but not confirmed
Alarms existed and all alarm information
Red
confirmed
Page19/75

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Om20Om200

Table of Contents